Durable LED Totem Display Manufacturer

The installation method mainly depends on the use environment (indoor/outdoor), stability requirements and wind load. The following is a more detailed classification and additional instructions:

Floor-standing installation (mainstream method)
(1) Indoor floor-standing installation
Features: Place directly on the flat ground, no need to fix, easy to move and adjust.

Applicable scenarios: shopping malls, exhibition halls, stages, conference centers, etc.

Notes:

The ground must be flat to avoid tilting or shaking.

If there is a large flow of people or there is a possibility of collision, anti-slip mats or simple fixing devices can be installed.

(2) Outdoor floor-standing type
General fixing method:

Use expansion screws (explosive screws) + a metal base to fix to the ground.

Suitable for areas with low wind and no typhoons.

Reinforcement method for strong wind/typhoon areas:

Concrete pouring foundation, pre-embedded anchor bolts to ensure wind resistance.

Can be matched with a counterweight base (such as cement blocks or metal counterweights) to enhance stability.

Applicable scenarios: squares, pedestrian streets, scenic spots, stadiums, etc.

(1) Pole/column suspension
Fixed to existing poles, electric poles or columns through clamps or brackets.

Applicable scenarios: both sides of roads, parks, parking lots, etc.

Notes:

The load-bearing capacity of the pole must be ensured to avoid overloading.

Additional reinforcement is required in windy areas, such as installing diagonal braces or windproof cables.

(2) Wall suspension
Fixed to the building facade or wall using expansion bolts or welded steel structures.

Applicable scenarios: commercial buildings, subway stations, airports, etc.

Notes:

The wall must be a load-bearing structure, and hollow bricks or lightweight walls require special treatment.

Heat dissipation and waterproofing (IP65 and above) must be considered.

Embedded installation, mobile installation, and ceiling installation.