Outdoor Front Flip Cover Cabinet Screen

The front flip cover cabinet is fixed with screws and threads, and requires corresponding tools to install and disassemble, which is troublesome. In daily life, the LED display screen will inevitably be damaged after long-term use, and needs timely maintenance.

The installation of the existing LED display screen cabinet is complicated, so it is not convenient for users to repair.

And the original cabinet structure is upgraded and designed to consist of two parts: the front cover and the back cover.

Front flip cover screen is used to fix the module, and the back cover is fixed to the wall. The front cover and the back cover are fixed by hinges.

It is connected to the metal frame (or screen body) with a hinge structure, and a support structure is designed behind the panel to ensure the stability of the LED display panel after it is opened, thereby protecting the LED display panel and ensuring the safety of maintenance personnel.

         

 

It usually appears in some unique application scenarios, such as when the LED screen needs to be close to the ground and display content diagonally upward.

In addition, those screens with double-sided LED display panels will also adopt a front flip design, allowing the LED display panel on either side to be opened outwards for maintenance of the LED screen.

Single-sided is mainly used for wall mounting, while double-sided is best suited for billboards on poles.

Its product advantages are as follows：

1. The design is lightweight and very safe when mounted on the wall, whether it is a brick wall or a concrete wall.

2. Additional design of reinforced ribs to further improve load-bearing capacity.

3. The power cable connector replaces the traditional power cable terminal connection method. Quick installation can effectively avoid the risk of electric shock caused by improper operation.

4. Energy saving. Advanced common cathode technology with high-efficiency IC can reduce power consumption by 30%, which is more energy-efficient than traditional panels.

The voltage of traditional display is 5V, and the voltage of front flip cover cabinet screen is 2.8v-3.8v.

It will also greatly reduce the surface temperature to 36℃, protecting all components from failure caused by high temperature.

5. Improved space utilization.